Corrosion Science and Engineering

  1. Corrosion Testing and Monitoring
    1. Laboratory Testing Methods
      1. Immersion Testing
        1. Weight Loss Tests
          1. Test Specimen Preparation
            1. Exposure Conditions
              1. Data Analysis Methods
                1. Corrosion Rate Calculations
                2. Coupon Testing
                  1. Specimen Design
                    1. Surface Preparation
                      1. Mounting and Exposure
                      2. Solution Preparation
                        1. Standard Test Solutions
                          1. Synthetic Environments
                            1. Natural Media Testing
                          2. Accelerated Testing Methods
                            1. Salt Spray Testing
                              1. Neutral Salt Spray
                                1. Acetic Acid Salt Spray
                                  1. Copper-Accelerated Salt Spray
                                    1. Test Conditions and Procedures
                                      1. Result Interpretation
                                      2. Humidity Cabinet Testing
                                        1. Constant Humidity Exposure
                                          1. Cyclic Humidity Testing
                                            1. Temperature-Humidity Combinations
                                            2. Cyclic Corrosion Testing
                                              1. Automotive Test Cycles
                                                1. Marine Exposure Cycles
                                                  1. Custom Test Development
                                                2. Electrochemical Testing Methods
                                                  1. Potentiodynamic Polarization
                                                    1. Experimental Setup
                                                      1. Scan Rate Effects
                                                        1. Data Interpretation
                                                          1. Corrosion Parameter Extraction
                                                          2. Linear Polarization Resistance
                                                            1. Theoretical Basis
                                                              1. Measurement Procedures
                                                                1. Stern-Geary Equation
                                                                  1. Real-Time Monitoring
                                                                  2. Electrochemical Impedance Spectroscopy
                                                                    1. Frequency Domain Analysis
                                                                      1. Equivalent Circuit Modeling
                                                                        1. Data Interpretation
                                                                          1. Coating Evaluation
                                                                          2. Electrochemical Noise
                                                                            1. Current and Potential Noise
                                                                              1. Data Acquisition
                                                                                1. Statistical Analysis
                                                                                  1. Localized Corrosion Detection
                                                                                  2. Galvanic Coupling Tests
                                                                                    1. Zero Resistance Ammetry
                                                                                      1. Galvanic Current Measurement
                                                                                        1. Potential Monitoring
                                                                                      2. Specialized Testing Methods
                                                                                        1. Stress Corrosion Cracking Tests
                                                                                          1. Constant Load Tests
                                                                                            1. Slow Strain Rate Tests
                                                                                              1. U-Bend Tests
                                                                                                1. C-Ring Tests
                                                                                                2. Hydrogen Embrittlement Tests
                                                                                                  1. Cathodic Charging
                                                                                                    1. Gaseous Hydrogen Exposure
                                                                                                      1. Mechanical Property Evaluation
                                                                                                      2. High-Temperature Oxidation Tests
                                                                                                        1. Thermogravimetric Analysis
                                                                                                          1. Isothermal Exposure
                                                                                                            1. Cyclic Oxidation
                                                                                                            2. Erosion-Corrosion Testing
                                                                                                              1. Jet Impingement Tests
                                                                                                                1. Rotating Disk Tests
                                                                                                                  1. Slurry Pot Tests
                                                                                                              2. Field Testing and Monitoring
                                                                                                                1. Atmospheric Exposure Testing
                                                                                                                  1. Test Site Selection
                                                                                                                    1. Specimen Mounting
                                                                                                                      1. Exposure Racks
                                                                                                                        1. Data Collection Procedures
                                                                                                                        2. Immersion Testing in Natural Waters
                                                                                                                          1. Site Characterization
                                                                                                                            1. Water Quality Monitoring
                                                                                                                              1. Specimen Retrieval
                                                                                                                              2. Buried Specimen Testing
                                                                                                                                1. Soil Characterization
                                                                                                                                  1. Installation Procedures
                                                                                                                                    1. Long-Term Monitoring
                                                                                                                                    2. In-Service Monitoring Techniques
                                                                                                                                      1. Corrosion Coupons
                                                                                                                                        1. Coupon Design
                                                                                                                                          1. Installation Methods
                                                                                                                                            1. Retrieval and Analysis
                                                                                                                                            2. Electrical Resistance Probes
                                                                                                                                              1. Probe Construction
                                                                                                                                                1. Measurement Principles
                                                                                                                                                  1. Data Interpretation
                                                                                                                                                  2. Linear Polarization Probes
                                                                                                                                                    1. Probe Design
                                                                                                                                                      1. Installation Requirements
                                                                                                                                                        1. Continuous Monitoring
                                                                                                                                                      2. Non-Destructive Testing Methods
                                                                                                                                                        1. Ultrasonic Testing
                                                                                                                                                          1. Thickness Measurement
                                                                                                                                                            1. Flaw Detection
                                                                                                                                                              1. Corrosion Mapping
                                                                                                                                                              2. Radiographic Testing
                                                                                                                                                                1. X-Ray Techniques
                                                                                                                                                                  1. Gamma Ray Methods
                                                                                                                                                                    1. Image Interpretation
                                                                                                                                                                    2. Eddy Current Testing
                                                                                                                                                                      1. Probe Selection
                                                                                                                                                                        1. Calibration Procedures
                                                                                                                                                                          1. Defect Characterization
                                                                                                                                                                          2. Visual Inspection
                                                                                                                                                                            1. Surface Examination
                                                                                                                                                                              1. Photography Documentation
                                                                                                                                                                                1. Damage Assessment
                                                                                                                                                                            2. Failure Analysis Techniques
                                                                                                                                                                              1. Preliminary Investigation
                                                                                                                                                                                1. Service History Review
                                                                                                                                                                                  1. Environmental Assessment
                                                                                                                                                                                    1. Failure Mode Identification
                                                                                                                                                                                    2. Specimen Collection and Preservation
                                                                                                                                                                                      1. Sampling Procedures
                                                                                                                                                                                        1. Chain of Custody
                                                                                                                                                                                          1. Storage Requirements
                                                                                                                                                                                          2. Visual and Macroscopic Examination
                                                                                                                                                                                            1. Fracture Surface Analysis
                                                                                                                                                                                              1. Corrosion Pattern Recognition
                                                                                                                                                                                                1. Dimensional Measurements
                                                                                                                                                                                                2. Microscopic Analysis
                                                                                                                                                                                                  1. Optical Microscopy
                                                                                                                                                                                                    1. Sample Preparation
                                                                                                                                                                                                      1. Metallographic Techniques
                                                                                                                                                                                                        1. Microstructure Evaluation
                                                                                                                                                                                                        2. Scanning Electron Microscopy
                                                                                                                                                                                                          1. High-Resolution Imaging
                                                                                                                                                                                                            1. Fractography
                                                                                                                                                                                                              1. Morphology Analysis
                                                                                                                                                                                                              2. Transmission Electron Microscopy
                                                                                                                                                                                                                1. Thin Foil Preparation
                                                                                                                                                                                                                  1. Crystal Structure Analysis
                                                                                                                                                                                                                    1. Defect Characterization
                                                                                                                                                                                                                  2. Chemical Analysis
                                                                                                                                                                                                                    1. Energy Dispersive X-Ray Spectroscopy
                                                                                                                                                                                                                      1. Elemental Analysis
                                                                                                                                                                                                                        1. Mapping Techniques
                                                                                                                                                                                                                          1. Quantitative Analysis
                                                                                                                                                                                                                          2. X-Ray Photoelectron Spectroscopy
                                                                                                                                                                                                                            1. Surface Chemistry
                                                                                                                                                                                                                              1. Oxidation State Analysis
                                                                                                                                                                                                                                1. Depth Profiling
                                                                                                                                                                                                                                2. Auger Electron Spectroscopy
                                                                                                                                                                                                                                  1. High Spatial Resolution
                                                                                                                                                                                                                                    1. Light Element Detection
                                                                                                                                                                                                                                    2. Secondary Ion Mass Spectrometry
                                                                                                                                                                                                                                      1. Trace Element Analysis
                                                                                                                                                                                                                                        1. Depth Profiling
                                                                                                                                                                                                                                      2. Mechanical Testing
                                                                                                                                                                                                                                        1. Tensile Testing
                                                                                                                                                                                                                                          1. Strength Evaluation
                                                                                                                                                                                                                                            1. Ductility Assessment
                                                                                                                                                                                                                                            2. Hardness Testing
                                                                                                                                                                                                                                              1. Microhardness Measurements
                                                                                                                                                                                                                                                1. Property Mapping
                                                                                                                                                                                                                                                2. Impact Testing
                                                                                                                                                                                                                                                  1. Fracture Toughness
                                                                                                                                                                                                                                                    1. Temperature Effects
                                                                                                                                                                                                                                                  2. Report Preparation
                                                                                                                                                                                                                                                    1. Data Compilation
                                                                                                                                                                                                                                                      1. Root Cause Analysis
                                                                                                                                                                                                                                                        1. Recommendations

                                                                                                                                                                                                                                                    Previous

                                                                                                                                                                                                                                                    7. Corrosion of Engineering Materials

                                                                                                                                                                                                                                                    Go to top

                                                                                                                                                                                                                                                    Next

                                                                                                                                                                                                                                                    9. Corrosion Prevention and Control