Category: Transfer functions

ITU-R BT.1886
ITU-R BT.1886 is the reference EOTF of SDR-TV. It is a gamma 2.4 transfer function (a power law with a 2.4 exponent) considered as a satisfactory approximation of the response characteristic of CRT to
Single-input single-output system
In control engineering, a single-input and single-output (SISO) system is a simple single variable control system with one input and one output. In radio it is the use of only one antenna both in the
X-parameters are a generalization of S-parameters and are used for characterizing the amplitudes and relative phase of harmonics generated by nonlinear components under large input power levels. X-par
Power gain
The power gain of an electrical network is the ratio of an output power to an input power. Unlike other signal gains, such as voltage and current gain, "power gain" may be ambiguous as the meaning of
Scattering parameters
Scattering parameters or S-parameters (the elements of a scattering matrix or S-matrix) describe the electrical behavior of linear electrical networks when undergoing various steady state stimuli by e
Transconductance (for transfer conductance), also infrequently called mutual conductance, is the electrical characteristic relating the current through the output of a device to the voltage across the
Two-port network
A two-port network (a kind of four-terminal network or quadripole) is an electrical network (circuit) or device with two pairs of terminals to connect to external circuits. Two terminals constitute a
Transfer function
In engineering, a transfer function (also known as system function or network function) of a system, sub-system, or component is a mathematical function that theoretically models the system's output f
Transfer functions in imaging
This article is about the transfer functions used in pictures and videos and describing the relationship between electrical signal, scene light and displayed light.
Perceptual quantizer
The perceptual quantizer (PQ), published by SMPTE as SMPTE ST 2084, is a transfer function that allows for HDR display by replacing the gamma curve used in SDR. It is capable of representing luminance
Gain (electronics)
In electronics, gain is a measure of the ability of a two-port circuit (often an amplifier) to increase the power or amplitude of a signal from the input to the output port by adding energy converted
Impedance parameters
Impedance parameters or Z-parameters (the elements of an impedance matrix or Z-matrix) are properties used in electrical engineering, electronic engineering, and communication systems engineering to d
Admittance parameters
Admittance parameters or Y-parameters (the elements of an admittance matrix or Y-matrix) are properties used in many areas of electrical engineering, such as power, electronics, and telecommunications